For Home

Stays White 2in1 Primer & Paint

stays-white-2in1-primer-750_2015.png
Description

Paint and prime your door at the same time and enjoy a brilliant white for 10 years, not bad for a few hours of DIY. You can use it on bare or previously painted wood and it’s easy to apply because it doesn’t drip.

  • Brilliant white and takes no time at all to apply
  • No need for primer – it’s all included in the tin!
  • Drip resistant so it’s really easy to paint with
  • Guaranteed to stay white for 10 years
  • Use on bare or previously painted wood
FIND A STOCKIST
Product Image
Coverage Calculator

How much do I need?

Measure your area precisely, drop the numbers into this smart calculator and it will tell you straight away how many litres you'll need to complete your project.

Use for the following wood types
  • Interior wood
    Interior wood
  • Doors & windows
    Doors & windows
  • Smooth planed wood
    Smooth planed wood

1 colours available including:
White

White

How to use 2in1 Primer & Paint

Before you start

You might be painting with a 2in1, but you still need to prepare the wood.

Our paint performs best when the temperature is above 10°C. Put down dust sheets to cover everything you don’t want to get paint on and open some windows and doors (but not the ones you’re painting!) for ventilation.

Don’t forget your face mask when sanding too, it can be quite a dusty job.

How to prep

  1. Lightly sand the wood with 120 grit sandpaper and sand in the direction of the woodgrain. This will give you an even finish that will help the paint and primer to stick.
  2. Let the dust settle and wipe it up with a cloth and white spirit.
  3. If you notice any knots, stop them from darkening with a knotting solution. Cracks and holes should be filled in too.

If you want to use this on wood that’s already been painted, you’ll need to strip it back to the bare wood. An electric sander will get the job done for you in no time at all.

Application

  1. Thoroughly stir your paint and primer to get rid of any lumps and to give it a smooth consistency.
  2. Use a synthetic brush and paint in the direction of the woodgrain. Leave the first coat to dry for four hours.
  3. Apply your second coat, in the same way you did the first.
  4. Your second coat will be touch dry in just 30 minutes and completely dry in four.

That’s it! Your wood will now stay brilliant white for 10 years.

Aftercare

Cleaning

Once the paint and primer has dried, you can clean your wood as normal. Pay attention to grubby finger prints that might stand out harshly against the brilliant white wood!

Repair

If you notice spots of damage, just sand down the area and reapply the paint and primer just like you did when you first painted it. Your wood will soon look good as new.

Technical Specification

Usage Interior wood including windows, doors and skirting boards
Coverage Up to 26m2 per litre
Dry time Touch dry in 30 minutes
Coat time Four hours
Number of coats Two
Colours White
Finish Matt
Durability Guaranteed to stay white for 10 years
Application Brush
Base Water
Sizes 0.75L, 2.5L
VOC Low