For Home

6 Year Anti Mould Aerosol

6 Year Anti Mould Aerosol.png
Description

Stop mould growing for six years and protect hard to reach places with 6 Year Anti Mould Aerosol. It’s quick drying and because you can just use the aerosol can, there’s nothing to clean up.

  • Stop common mould from growing
  • Easy to apply
  • Dry in 10 minutes
  • Prevents all common mould (including black mould) from growing
FIND A STOCKIST
Product Image
Coverage Calculator

How much paint do I need?

Measure your area precisely, drop the numbers into this smart calculator and it will tell you straight away how many litres you'll need to complete your project.

Use on the following surfaces
  • Indoor walls and ceilings
    Indoor walls and ceilings

1 colours available including:
White

White

How to use 6 Year Anti Mould Aerosol

Before you start

The room needs to be above 10°c and open windows and doors for added ventilation. Put down dustsheets to prevent paint getting everywhere and mask off areas surrounding the mould to avoid overspray.

How to prepare walls

  1. If there is already mould on your walls, remove it with mould killer. Don’t try and get rid of it by sanding or any other means as this could spread the mould spores.
  2. Remove any loose or peeling plaster or paint by sanding it. This will give you a smooth surface and help the Anti Mould paint stick.

 

Application

Application

  1. Shake the can until you hear it rattle. Keep shaking for another minute.
  2. Hold the can upright roughly 20-30cm away from the wall or ceiling.
  3. Spray from side to side to get an even finish.
  4. Wait 10 minutes for the first coat to dry.
  5. Apply the second coat and wait another 10 minutes.
  6. Check the coverage to see if you need to apply a third coat.
  7. After you’ve applied the final coat, wait 24 hours before letting condensation build up in the room.

Don’t paint over the Anti Mould Paint as this will stop it from working.

Aftercare

The Anti Mould Paint will protect your walls or ceiling from mould for up to six years so you shouldn’t have any mould to clean off after application.

Cleaning

Hold the can upside down and spray for a few seconds. Then wipe the nozzle with a damp cloth.

Technical specification

Usage: Interior walls and ceilings
Coverage: Up to 13m2 per litre
Dry time: Completely dry for 24 hours
Coat time: 10 minutes
Number of coats: Two to three
Colours: White
Finish: Matt
Durability: Stops mould growing for six years
Application: Aerosol
Sizes: 0.4L